Setup Instructions for Using
the SK-MDM Modem with the Secura Key
28SA-Plus Access Control Unit and/or
SK-ACP Advanced Control Panel
The new SK-MDM has been preconfigured to work with Secura Key
access control systems and SK-NET-MLD software. (NOTE: SK-NET-DM
and the free download version of SK-NET do not support modem
connections.) NOTE: This modem requires version 3.0 or later of
SK-NET-MLD software.
1. Plug the telephone cable provided into the SK-MDM and into the
jack for a dedicated phone line.
2. Plug the serial cable (provided) into the DB25 outlet on the SK-MDM.
3. Connect the serial cable wires to the “Communication” portion of the
28SA-PLUS terminal block or to the J-7 connector on the SK-ACP.
/
L
E
N
A
P
R
E
D
A
E
R
E
R
I
W
R
O
L
O
C
5
2
B
D
1
K
C
A
L
B
7
2
E
T
I
H
W
3
3
D
E
R
8
4
N
E
E
R
G
4
5
E
G
N
A
R
O
2
4. Connect the modem power supply to the SK-MDM and plug into
a 110VAC wall outlet.
5. For added protection, the modem power lines, the phone line
connection and the serial connection may be connected to suitable
surge suppressors.
6. Establish connection from the computer to the access control
system using SK-NET-MLD software. (Follow instructions in the
SK-NET manual.)
OVER FOR REMOTE SITE MODEM CONFIGURATION with 28SA-PLUS
