Products with CE Marking comply with EMC Directive (2014/30/EU); Low Voltage Directive (2014/35/EU); RED (2014/53/EU);
ROHS Directive (2011/65/EU) issued by the Commission of the European Community. Compliance with these directives
implies conformity to the following European Norms:
EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328
If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory
regulations. Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent
batteries/accumulators with common household waste is prohibited! Batteries/accumulators that contain hazardous
substances are marked with the symbols on the side. These symbols indicate that it is prohibited to dispose of these
batteries/accumulators in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium,
Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be charged to the designated
collection points in your community, outlets or wherever batteries or accumulators are sold. Following these instructions will
allow you to fulfill the legal requirements and contribute to the protection of our environment!
BATTERY CAMERA INSTALLATION
Battery Camera
Installation
Bracket
Installation
Stand Installation
Confirm the
position and mount
the camera to the
bracket clockwise.
Install the stand to
the bracket.
Mount the bracket
with the screws
provided.
1
2
3
If you have changed
your Wi-Fi router,
please reset the
device by pressing
the reset button for 3
seconds to restore
to factory default.
Follow the Quick
Start Guide “SETUP
THE APP” step
(iOS1.2~1.15/An-
droid 2.2~2.15) to
setup the device
again.
NOTE
2
NOTE
How to Reset Wireless Hub.
Please make sure wireless hub is power on and follow below steps:
Press and hold the Reset button for 3 seconds until RED status indicator quickly flash.
NOTE
1
Mobile application support system:
Android: 5 or later
IOS: 10 or later
NOTE
3
How to Modify
the Password
For your own security reason, modifing your password
regularly is recommended.
1. Press “Edit Setting” icon on the bottom of device list page.
2. Press “Setting” icon which be above on the device.
3. Press “Advanced” icon and enter admin password in the
pop-up window for verifying.
Default Admin Password is “123456”.
4. You will be able to modify Security and Admin password in
the advance setting page.
4