2
All Second Wind Air Purification portable systems have a (3) year unit and 1 year lamp
warranty. (MODELS:1002kcs, 1000 ka-kcs, 1001 ka-kcs)
ONE (1) YEAR COVERAGE LAMPS
The lamps are warranted by Second Wind for a period of one (1) year from the date of the
original installation, when installed and operated in accordance with Second Wind
recommendations. If during this period a lamp fails, Second Wind will provide a free
replacement. You must pay shipping charges and all other costs of warranty service. Second
Wind will not pay labor involved in diagnostic calls or in removing, servicing, or replacing
parts.
THREE (3) YEAR COVERAGE UNIT
The covered equipment and covered components are warranted by Second Wind for a
period of three (3) years from the date of the original unit installation, when installed and
operated in accordance with Second Wind recommendations. If during this period a covered
component fails, Second Wind will repair or replace the part. You must pay shipping
charges and all other costs of warranty service. Second Wind will not pay labor involved in
diagnostic calls or in removing, servicing, or replacing parts.
REPAIRS
All repairs of covered components must be made with authorized service parts. Labor
charges resulting from diagnostic calls or service are not covered by this warranty.
CARE OF EQUIPMENT
Your new Second Wind Air Purifier must be properly installed, operated and maintained in
accordance with the unit installation, operation, and maintenance instructions provided with
each unit. Failure to provide maintenance per Second Wind instructions will void warranty.
1 Do not look directly at the lamps, without UV protective glasses.
2 Read instruction manual before operating the units.
3 Use recommended accessories (i.e. lamps, ballast)
4 Make sure unit is installed so that the UV light
can not
be seen directly through any returns or supplies.
5 Check damaged parts: Before further use of the unit, any damaged part should be carefully checked to
ensure that the unit will operate properly. Any part that is damaged should be properly repaired or
replaced.
6 Units should not be installed with in 12-18 inches of any non UV resistant materials. If materials are in
question call manufacturer of said products to see if they are made with UV inhibitors. Prolonged UV
exposure will degrade non UV resistant materials. Non UV resistant materials must be shaded or cov-
ered.
Summary of Contents for 1000KA
Page 1: ...1...