2.2
Technical specifications
Processors
NXP i.MX 8X Family based on ARM
®
Cortex
®
-A35 cores + general purpose
Cortex
®
-M4F 264MHz processor:
•
i.MX 8QuadXPlus - Full featured, 4x Cortex
®
-A35 cores, up to 1.2GHz
•
i.MX 8DualXPlus - Full featured, 2x Cortex
®
-A35 cores, up to 1.2GHz
•
i.MX 8QuadXPlus - 4x Cortex
®
-A35 cores, up to 1.2GHz no DSP
•
i.MX 8DualXPlus - 2x Cortex
®
-A35 cores, up to 1.2GHz no DSP
Memory
Soldered Down LPDDR4 memory, 32-bit interface, up to 4GB
Graphics
Vivante GC7000Lite GPU supporting OpenGL 3.0; OpenGL ES 3.1; OpenCL
1.2; OpenVG 1.1.
Embedded VPU supporting:
•
HW Decoding of HEVC/H.265, AVC/H.264, VP8
•
HW Encoding of AVC/H.264
Video Interfaces
LVDS Single/Dual Channel connector
and
eDP connector (optional)
MIPI-CSI camera connector
Video Resolution
Up to 1920x1080p @ 60Hz
Mass Storage
Optional eMMC 5.1 Drive soldered on-board, up to 64GB
Networking
Up to 2x Gigabit Ethernet interface
Optional Shielded Ultra Small Dual Band WiFi 802.11 a/b/g/n/ac with Bluetooth
5.0 Module onboard
USB
2 x USB 2.0 Host ports on Type-A sockets
1 x USB 3.0 Host ports on Type-A socket
1 x USB 2.0 Host port header dedicated to Touch Screen driver connection
1 x USB OTG micro-AB connector for use in combination with Recovery mode
Audio
an integrated Tensilica® HiFi 4 DSP audio processor
Texas Instrument TLV320 I2S Stereo Audio Codec
TRRS Combo Audio Socket and on-board header connector
Serial ports
1x RS-232 (factory alternative to 4-wire UART)
1x RS-485 (factory alternative to 2-wire UART)
1x CAN port (factory option)
2x Debug UARTs
Other Interfaces
On I/O Connector:
•
1x PWM @3.3V
•
1x I2C interface @3.3V
•
2x ADC @1.8V
•
14x GPIOs @3.3V
•
2x GPIOs @3.3V (factory option)
•
1x GPIO @3.3V
miniPCI-e slot with x1 PCIe and USB 2.0 interface
On-board ultra-low power RTC
Watchdog
JTAG connector
Dedicated connector for I2C Touch Screen Controller Support
Optional Trust Secure Element
Power supply voltage:
+12V
DC
.. +24V
DC
Operating temperature:
Commercial version 0°C ÷ +60°C **.
Industrial version: -40°C ÷ +85°C ** (limited to -30°C ÷ +85°C with WiFi/BT
module on-board)
Dimensions:
147 x
-
Supported Operating Systems:
Yocto
Android (planned)
** Measured at any point of SECO standard heatsink for this product, during
any and all times (including start-up). Actual temperature will widely depend
on application, enclosure and/or environment. Upon customer to consider
application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated. Please also check
paragraph 4.1
