SBC-C23
SBC-C23 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: S.B. - Reviewed by L.B. -Copyright © 2020 SECO S.p.A.
14
2.2
Technical specifications
Processors
NXP i.MX6SX SoloX, Single ARM
®
CORTEX
®
-A9 core processor @ 1GHz +
Cortex
®
-M4 core @ 227MHz
Memory
32-bit soldered down DDR3L memory, up to 1GB
Graphics
Integrated Graphics Vivante GC400T
Dedicated 2D and 3D Hardware accelerator
Supports OpenGL
®
ES2.0 / 1.1, OpenVG 11.1, DirectFB
Video Interfaces
Optional Single-Channel 18-/24-bit LVDS connector with Touch Screen
dedicated signals
Video Resolution
Up to 1366x768 @ 60Hz, 24bpp
Mass Storage
Optional onboard eMMC Disk, up to 8GB *
microSD card slot
Networking
Up to two FastEthernet RJ-45 connectors
Optional WiFi (802.11 b / g / n) +BT LE combo antenna on-board
2G, LTE-CatM1 or LTE Cat1 Modem embedded on-board, with up to 3 external
antennas
microSIM slot + electronic SIM soldered on-board for the Modem
M.2 Socket 1 Key E 2230 + M.2 Socket 2 Key B 2242 Slot for connectivity
USB
1 x USB 2.0 Type-A socket
1 x USB 2.0 OTG on micro-AB connector
Audio
On-board buzzer
* Please consider that for HDD and Flash Disk manufacturers, 1GB = 10^9 Byte. Some
OS (like, for example, Windows) intends 1GB = 1024^3 byte, so global capacity
shown for Disk Properties will be less than expected. Please also consider that a
portion of disk capacity will be used by internal Flash Controller for Disk management,
so final capacity will be lower
Serial Ports
Expansion connector with:
-
1 x RS-232 port
-
1x RS-485 port
-
2 x CAN port
Other interfaces
3x Multicolor Signalling LEDs
Reset Button
Programmable (*) expansion PCB terminal block with:
-
1x RS-232 port
-
1x RS-485 port
-
2x CAN port
-
4x analog inputs
-
I2C
-
2x PWM
(*) Please note that some of these interfaces are factory options, other configurations are made via SW
using the pin multiplexing possibilities of the i.MX6SX processor.
Power supply voltage: +12V
DC
DC power jack and 2-poles PCB terminal block for voltage supply
Optional Li-Ion Rechargeable battery
Operating temperature: 0°C ÷ +60°C** (commercial version)
-40°C ÷ +85°C** (industrial version)
Dimensions: 89.5 x 153 mm (3.52
”
x 6.02
”
).
Supported Operating Systems:
Wind River Linux
** Measured at any point of SECO standard heatspreader for this product,
during any and all times (including start-up). Actual temperature will widely
depend on application, enclosure and/or environment. Upon customer to
consider application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated.
Please also check paragraph 4.1
