ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
51
4.3.17.1
Super IO Configuration submenu
4.3.17.2
Internal FAN Settings submenu
Watchdog Configuration
See Submenu
Configures the Embedded Controller
’
s Watchdog Timer
GPIO Configurations
See Submenu
Sets the parameters for GPIOs
Menu Item
Options
Description
Serial Port 1
Enabled/Disabled
Enables or disables Serial Port 1
Address
0x3F8
0x3E8
0x2F0
0x2E8
0x2E0
0x2A8
0x2A0
0x288
0x280
Serial Port IO Base Address
IRQ
3 / 4 / 5 / 6 / 7 / 10 / 11 / 14 / 15 Serial Port IRQ line to assign to Serial Port #1, if enabled.
Serial Port 2
Enabled/Disabled
Enables or disables Serial Port 2
Address
0x3F8
0x3E8
0x2F0
0x2E8
0x2E0
0x2A8
0x2A0
0x288
0x280
Serial Port IO Base Address
IRQ
3 / 4 / 5 / 6 / 7 / 10 / 11 / 14 / 15 Select the IRQ line to assign to Serial Port #2, if enabled.
Menu Item
Options
Description
Enhanced 3 wire RPM
measurement
Enabled / Disabled
Enabled: on each measurement phase Duty Cycle will be raised to 100% for 100mS then restored to
original value to allow a more precise measure avoiding unwanted ripple on tachometer.
Disabled: periodic fan speed up will not occur, but RPM measurement will not be accurate
