Version 2.0
i-PAN7
2 of 14
Interfaces / Signals accessible over extension connectors:
10/100 MBit Ethernet
2 x USB Host
USB Slave
I2C
SD/MMC Card
1
RS232 COM1
2
FF_UART
RS232 COM2
3
BT_UART (if GSM not used
4
)
COM3
5
STD_UART (if GPS not used
6
)
RS485 (instead of COM2 BT_UART
7
)
Audio out
Mic input (mono) for electret-capacitor microphones
3 x 10 bit ADC
IrDA
Programmable input and output pins (CPLD)
CAN bus
▪
Please do not use the card socket on i-PAN7 and Connector Board at same time! This can
cause data loss on the memory card!
▪
level converter: 24V
▪
level converter: 24V
▪
if mounted modem uses COM2 for communication with CPU
▪
CPU signals: 3,3V
▪
if mounted GPS module uses COM3 for communication with CPU
▪
customer can choose between RS232 or RS485, see also note 3
