Version 2.0
i-PAN T10 Baseboard
9 of 20
J217: iMod Button/I2C or UART connector
The iMod connectors are standard connectors defined by SECO to allow customers to easily
add functions to a baseboard.
There are two mounting options for J217:
a) iMod Button/I2C
The connector got 3 GPIOs for buttons and an I2C-interface for sensors etc.
Pin
Signal
Function
1
FASTBOOT
On/Off, Fastboot, … (OS
-specific)
2
SP113
Generic Button, i.e.
3
SP117
Generic Button, i.e. Volume-
(opt. RESET_IN of Trizeps module)
4
GND
Power
5
+3V3
Power
6
I2C_CLK
I2C Clock signal
7
I2C_DATA
I2C Data signal
8
SP119
GPIO; Mainly used as interrupt input pin by attached
boards.
9
SP112
GPIO; Mainly used as output.
10
\RESET_OUT
Reset output of the Trizeps module:
Low during reset and suspend.
High when running.
Connector: 687110149022 by Wuerth
