SECO-LARM SECOPAGE 35E, Installation Manual

Page: 6 / 6

SECO
-LARM
®
U
.S
.A
., Inc.
Page 6
Page 7
Figure 4:
SECOPAGE 35E7 —
FOR USE AS A STAND-
ALONE BURGLAR ALARM
NOTE: 1
.
This method is suitable for the SECOPAGE 35E and SECOPAGE 35E7. NOTE for the SECOPAGE 35E: a.
No YELLOW wire (the alarm is powered on a 24-hour basis only). b.
No BLUE/BROWN wire (no delayed zones).
2
.
This diagram is for an example only. Other zones can be connected (up to 6 zones for the SECOPAGE 35E7.)
3
.
Pager requires 1A of power during transmission.
4
.
The manual page button operates normally.
5
.
Minimum pulse length required to trigger: a. SECOPAGE 35E: 1 second. b. SECOPAGE 35E7: 100 msec.
6
.
ANTENNA MUST BE CONNECTED.
L1
C1
C2
Fuse (2A)
Battery
BLUE — Instant N.O. (-) trigger input BLACK — Ground (-) input RED — +12VDC (+) input YELLOW — Arm/disarm input (GROUND to arm, BREAK ground to disarm, or connect directly to GROUND for 24-hour operation)
Figure 3:
PAGING WITH ZONE ANNUNCIATION
Paging button
(-) N.O. delay zone
(-) N.O. instant zone
BLUE/BROWN — Delay N.O. (-) trigger input
Alarm control panel or
communications panel
BLUE / WHITE — Instant N.O. (-) trigger input
BLUE / GREEN — Instant N.O. (-) trigger input
PURPLE / BROWN — Delayed N.O. (+) trigger input
WHITE / RED — +12VDC (+) siren output, (max 1A)
RED — +12VDC (+) input (via supplied 2A fuse)
BLACK — Ground (-) input
BLUE / BROWN — Delayed N.O. (-) trigger input
L1
C1
C2
Strip
antenna
(E-35ANT)
CB
antenna
YELLOW* — Arm/disarm input (GROUND to arm, BREAK ground to disarm)
t
PURPLE — Instant N.O. (+) trigger input
BLUE — Instant N.O. (-) trigger input
BLACK / WHITE — Paging push-button, N.O. switch
NOTE — CONNECT CB
ANTENNA OR STRIP
ANTENNA BEFORE
TESTING THE UNIT.
For optimum transmission
range, adjust L1, C1, & C2
after connecting antenna.
(See "Connecting and Tuning
an Antenna."
* NOTE regarding the
YELLOW wire — To arm
the alarm, apply ground to
the YELLOW wire (there is
a 60-second delay before
the alarm arms). To
disarm, break the ground.
t
Antenna jack
Paging
button
Fuse (2A)
+12VDC power
supply and battery
*
*
*
*
*
*
*
N.O. switch (magnetic
contact, push-button, etc.)