ENFORCER SLI 820R/-4
Owner's Manual
Page 3
MODEL NO. REFERENCE:
!
SLI 820R & SLI 820R-4
—
Excludes RF transmitter ( optional ).
!
SLI 820RTF & SLI 820RTF-4
—
Includes 2 RF fixed code transmitters.
!
SLI 820RTC & SLI 820RTC-4
—
Includes 2 RF code hopping transmitters.
NOTE: Model no. without -4 represents alarm units using 315 MHz frequency and model no. with -4 represents
alarm units using 433.92 MHz frequency.
ARMING (with factory remotes)
To arm the alarm, lock the doors by using the
factory remote or by pressing the lock switch on
the door panel. However, to suit user style and
preference, the SLI 820R/-4 offers a choice of
arming styles. Tell your dealer which is best for
you:
"
Active Arming
Turn your ignition OFF and close all the doors.
Then arm the alarm by locking all the doors
with the factory remote. If the siren chirps
and parking lights flash once, the alarm is fully
armed.
If the siren chirps 3 times, the alarm is either
waiting for the vehicle’s delayed domelights to
turn OFF (if your vehicle is so equipped), or it is
telling you that one of the alarm’s zones (a
door, or the hood, or trunk) is either open or is
not functioning properly. (See ZONE BYPASS,
page 4). Also, check to make sure your car’s
domelight switch was not left in the ON
position.
"
Passive arming
Turn your ignition OFF, and open a door to exit
the car. When the last door is closed (and the
domelight turns OFF, if your car has delayed
domelights), the siren chirps and parking lights
flash once. The LED flashes quickly during the
30-second arming countdown, after which the
siren chirps and parking lights flash once more
to confirm the alarm is completely armed.
If you wish, you can open a door during the
arming countdown, and keep it open for as long
as needed. The LED turns OFF while the door
is opened. Close the last door, and the siren
will chirp and parking lights flash once to
show the 30-second arming countdown has
started again. The LED will also begin to
flash quickly.
If you close the last open door, and the siren
does not chirp and parking lights do not flash,
you know that one or more openings are not
closed properly. This is SECO-LARM’s patented
Quick and Quiet Testing (Q.Q.T.™), and it
prevents you from thinking your alarm is
armed when it may not be. In this case,
double-check that all the doors, as well as the
hood and trunk, are closed properly, and that
your vehicle’s domelights are OFF. If you
cannot locate the problem, but need to arm the
alarm, then press the lock button to
immediately arm the alarm and bypass
whatever zone is open (see ZONE BYPASS,
page 4).
NOTE
— Under passive arming, you can force your
alarm to arm immediately any time during the 30-
second arming countdown by pressing the factory
remote lock button.
NOTE
— Make sure your car’s domelight switch is
not in the ON position when you arm your alarm
either actively or passively, otherwise the alarm
may not arm properly if the domelight switch is left
ON.
NOTE
— There are references to opening or closing
a door throughout this manual. “Door” also
includes your hood and trunk, if they are protected.
Consult your dealer.
