ENFORCER
7-Day Timer
4
SECO-LARM
U.S.A., Inc
Set the current time in 12- or 24- hour clock format.
Note: The backup battery will preserve clock time during power failure
To set the time:
Setting the Time:
Entering Events:
The 7-Day Timer can store up to 60 events.
When an event is active, the event number will show on the LCD.
In fixed mode, ON or OFF will show on the LCD.
Fixed mode means the relay will activate with one event and deactivate with another event.
In pulsed mode, ON and OFF will both show on the LCD.
Pulsed mode means the relay will activate for a set period of time and then automatically
turn off.
NOTE:
The timer only executes future events. For example, a Monday 8:00 AM event that is
programmed at 10:00 AM on Monday will not execute and come into effect until the following
Monday at 8:00 AM.
Press
SET
If the security code is enabled, enter
the security code
Press
UP/DOWN
Press until TIME setting mode
is selected
When selected, TIME will flash
Press
ENTER
Enters the time setting mode
TIME is solid
Use the UP/DOWN keys to select
the day of the week
SU MO TU WE TH FR SA
Press
ENTER
Use the UP/DOWN keys to select
the current hour
Press
ENTER
Use the UP/DOWN keys to select
the current minute
Press
ENTER
AM or PM flashes (depending on
current time)
Use the UP/DOWN keys to select
12- or 24-hour clock
Default is 24-hour
Press
ENTER
Exits the time setting mode
Returns to the main screen
Operating Modes:
The SA-027WQ has two operating modes, Automatic and Manual.
In Automatic Mode the SA-027WQ follows programmed events and the ON or OFF icons are
solid. This mode is used when programmed events are required.
In Manual Mode the SA-027WQ does not follow programmed events and the ON or OFF
icons are flashing. This mode is used to manually operate the relay.
Holding the Mode button for 3 seconds switches between the operating modes.
