ENFORCER 12VDC Switching CCTV Power Supply
4
SECO-LARM U.S.A., Inc.
Installation Notes:
Input Voltage Note (for PC-U1820-PULQ & PC-U1830-PULQ only):
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2018 SECO-LARM U.S.A., Inc. All
rights reserved.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for two (2) years from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
IMPORTANT:
Users and installers of this product are responsible for ensuring this product complies with all national,
state, and local laws and statutes. SECO-LARM
will not be held responsible for the use of this product in violation of any
current laws or statutes.
Also Available from
SECO-LARM
®
:
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
®
PICSN7
MI_PC-Uxxxx-PULQ_180823.docx
CCTV Power
Supplies
12VDC AC Adapters
Power Converters
DC Connectors
PA-U0405-NULQ
shown
ST-UV12-S1.0Q
shown
ST-LA115-TPQ
shown
CA-161T / CA-151T
shown
•
ALWAYS TEST OUTPUT VOLTAGE BEFORE CONNECTING DEVICES.
•
Indoor use only. Do not mount the unit where it may be exposed to weather or high humidity.
•
For professional installation only.
•
Installation must conform to all local laws and building codes.
For 220VAC input voltage, locate the input voltage switch
on the bottom of the enclosure. Switch the input voltage
from 110V to 220V as shown in Fig. 5.
110V
220V
Fig. 5 - Input voltage switch
