ENFORCER IP Corner-Mount Camera
3
SECO-LARM U.S.A., Inc
Mounting screws
DC jack Pigtail connector
Important:
Do not cut DC jack or RJ45 jack as warranty will be voided.
RJ45 jack
Camera cover
Security screws
BNC jack
1.
Use the included security wrench to loosen the screws
and remove the camera cover from the camera.
2.
Run a 12VDC power supply wire and cable with an
RJ45 jack through the wall at the corner where the
camera is to be mounted.
3.
Execute "IP Manager" on the PC.
4.
Press the "Find" button. IP cameras connected to the
same router will be searched and listed. This may take
several seconds. Default IP address is 192.168.1.30.
5.
Right-click the desired product, and press "IP Change".
6.
Use web port number 80. This is an internal port.
7.
IP address: You may use Dynamic IP or you may set
Static IP as below:
Typical IP setting is as follows.
IP address.: 192.168.0.10 (you can change the last column)
Netmask: 255.255.255.0
Gateway: 192.168.0.1
DNS1/2: You can copy the PC's network properties.
This is for internet environments.
8.
Input "admin" for User ID and password
NOTE:
It is recommended that you change the default
password.
9.
Press "Change" to save settings and allow 10s for
changes to appear.
10.
Right-click the desired device and click
"Open Web Page".
11.
Enter Username / Password.
12.
Click "Live" on top right of the screen.
13.
Click yes for "ActiveX Control".
14.
After the installation of Active X, you will be able to view
the live feed only with Internet Explorer.
15.
Visit
http://www.seco-larm.com/EV-N4206-2S4Q
for the Web Admin Manual.
1.
Please read this manual carefully and keep it for
future reference.
2.
Use the camera within given temperature and
electrical limits.
3.
Do not point the camera at the sun. Heat could damage
the camera, even when not in use.
4.
Do not mount the camera in areas exposed to radiation,
strong magnetic fields, or strong electrical signals.
5.
Do not open or disassemble the camera. There are no
field-serviceable parts inside.
6.
Do not drop the camera or subject it to
strong vibrations.
Overview:
Before Starting:
Installation:
