ENFORCER IP Fixed Turret Camera
SECO-LARM U.S.A., Inc.
3
Before Starting:
Overview:
Installation:
RJ45 Ethernet Jack
DC Jack
DC Plug with
terminal block
Micro SD
Card slot
Reset
button
Top of camera
Micro SD / Reset button
compartment
1.
Please read this manual carefully and keep it for
future reference.
2.
Use the camera within given temperature and
electrical limits.
3.
Do not point the camera at the sun. Heat could
damage the camera, even when not in use.
4.
Do not mount the camera in areas exposed to
radiation, strong magnetic fields, or strong
electrical signals.
5.
Do not open or disassemble the camera. There
are no field-serviceable parts inside.
6.
Do not drop the camera or subject it to strong
vibrations.
1.
Run a 12VDC power supply wire and cable with
an RJ45 jack through the wall at the location
where the camera is to be mounted. The 12VDC
power supply wire is not required if using PoE.
2.
Install and Execute "Device Config Tool" on a
computer connected to the same network as the
camera.
3.
Press the "Search" button. This will search for IP
cameras connected to the same router on the
network. It may take several seconds to complete.
Default IP address is 192.168.1.168.
4.
Once the search is complete, click on the camera
IP or type the IP address manually using Internet
Explorer.
5.
IP Address: The camera may use Dynamic or
Static IP addressing. An example of a typical static
IP setting is as follows:
IP Address: 192.168.0.10 (you can change the
last column)
Netmask: 255.255.255.0
Gateway: 192.168.0.1
DNS1/2: You can copy the PC’s network
properties. This is for an internet
environment.
6.
Input "admin" for user ID and password. If this is
the user's first time logging into the camera, the
user will be prompted for a new password.
NOTE:
If the password is unknown, hold the
RESET button located on the camera for
about 10 seconds and reload "Device
Config Tool".
7.
In order to access the camera web interface, the
user will be prompted to download and install the
Active-X web plugin.
8.
Once installed, the user will be able to view live
camera video and modify necessary
configurations.
NOTE:
For the full Web Admin manual, download from the camera’s product page on www.seco-larm.com.