SED 900 TESTING AND SETUP
3
HAND HELD POWER UP
Note: If the unit has an external charger fitted it will
automatically power up the hand held when connected, and power down
when removed
TURNING HAND HELD ON
Press and hold the front power switch down until
the out light comes on then let it go
The following leds should appear when on and running
Rf = radio link ok
Pwr led = power on
The following led will come on at times
Lbatt led= low battery
Tx = data to master unit
Rx = data from master unit
Chr led = indicated charging modes
On = 5 min batt test
Fast = bulk charge
Wink=charge complete
TURNING HAND HELD OFF
Press and hold the front power switch and wait for 2 beeps then let it go
SELECTING IN OR OUT PORT
Press I/O button and the indicator
light will change to In or out.
Upon power up it will always
power up on the
out port
