Figure 9-2
Figure 9-1
6
Figure 9-3
Figure 9-3
Attention:
The right mount counterweight should be mounted after installation of all arm is
completed to avoid any falling down of crane arm.
5. Camera and remote head
To install the remote head, simply plug the remote head onto the mounting frame, and turn locking
lever to tighten it. (Figure 10)
Remote head
Mounting frame
Leveling bubble
Locking lever
Figure 10
Balance should be adjusted after the camera is installed. If camera uses battery to supply power,
the battery should be installed before adjusting balance. First of all, release the gear of tilt motor;
put the DV camera on the camera plate, use the screw to fix it. Then adjust the positions of the plate
backward or forward according to which way the camera turns, adjust balancing frame upward or
downward according to which way the camera turns, and repeatedly adjust the positions of plate
and balancing frame to ensure the camera doesn’t move anymore when turning to any position.
