www.secabo.com
Troubleshooting
Vinyl cutter terminates job with pause on display and does not react when buttons are pressed.
In this case, it is necessary to restart the vinyl cutter to eliminate the error.
Possible causes:
> Job transferred in wrong format (too large).
> Settings changed during transfer operation.
> Plotter set to pause during cutting operation to change contact pressure or speed.
Jobs are always output too large:
Possible causes:
> Resolution incorrectly adjusted (steps in mm) the correct value is 40.000 steps/mm
> Output size greater than 100%.
An imported job (EPS) is plotted a number of times at the same position.
Possible causes:
> File may be corrupted and should be checked. Straight lines are cut zigzag
Possible causes:
> Blade adjustment and/or contact pressure incorrect and should be checked.
