Seca mBCA 525 Instructions For Use Manual Download Page 89

Page: 89 / 194

Operation • 89

English

-1

-3

-0

-2

3. Press the

button.

All measurements for the selected analysis parameter are displayed.
The latest measurement is selected automatically.

You have the following options for continuing:

►

Press the drop-down menu: Filter measuring results by period (a

maximum of 5 measuring results are displayed). Then continue at

step 5.

►

To select values for the history individually: continue at step 4.

►

Press the

button: Add a comment

►

Press the

button: Return to the previous view

NOTE

Just a single comment can be added to each measured result.

Existing comments will be overwritten.

4. Press the

checkboxes for all measurements (maximum: 5) which

you want to look at in the history.

5. Press the

button.

The history is displayed (in this case: three measurements)

Summary of Contents for mBCA 525



































































































































































































Search results

Summary of Contents for mBCA 525

Reviews:

Brands by name

Popular brands

Seca mBCA 525, Instructions For Use Manual

Search results

Summary of Contents for mBCA 525

Reviews:

Brands by name

Popular brands