Setting up peripherals • 181
17
-1
0-
05
-3
53
-0
02
g_
10
-2
02
0
B
5.5 Setting up a seca 360° wireless connection
Introduction
If you use devices from the
seca 360° wireless
system in your institution, e.g.
a measuring station, you can connect them to the
seca mVSA 535
/
seca mBCA 525
. You can submit the parameters height and weight directly
to the device and adopt them in a seca patient file.
On the
seca mVSA 535
, the values also appear in the Vital signs tab.
In order to be able to communicate with devices from the
seca 360° wireless
system, the
seca 360° wireless
module of the
seca mVSA 535
/
seca mBCA 525
must be activated and a wireless group set up.
NOTE
• The device can only receive data, not transmit it, via the
seca 360° wireless
connection.
• Follow the instructions in this section to achieve a stable connection
of the desired
seca 360° wireless
devices and to prevent the
undesired integration of other devices.
• You should also follow the instructions for use for the
seca 360° wireless
system devices being used.
Activating/deactivating the seca 360° wireless module
Setting up a seca 360° wireless connection
1.
Messen
2. Senden
seca 360° wireless
3. Empfangen
4. Übernehmen
Beispiel-Darstellung:
Messstation
seca 285
mit
seca mVSA 535
1. Measure
2. Submit
3. Receive
4. Adopt
Example display:
seca 285
measuring station with
seca mVSA 535
