148 •
seca mVSA 535
/
seca mBCA 525
17
-1
0-
05
-3
53
-0
02
g_
10
-2
02
0
B
3.6 Making presets for vital signs measurement
In the
Settings
tab, you can set up the settings for blood pressure,
temperature and SpO
2
measurements preferred in your institution.
The user can modify the settings during a measurement procedure
. The presets will be active again after the end of the
measurement procedure.
For the Vital signs tab, you can select a color mode to enable the device to be
read perfectly whatever the illumination conditions. This function is not avail
-
able for other tabs. This setting cannot be changed during a measurement
procedure.
Presets for blood pressure
NOTE
This is where to specify default settings which the user can modify for
the respective current measurement procedure. The settings from the
default settings then become active again.
Making general settings
1. Press the
Settings
tab.
Presets for pulse rate (seca measuring equipment only)
Presets for temperature (COVIDIEN
