Troubleshooting • 119
17
-1
0-
05
-3
53
-0
02
g_
10
-2
02
0
B
11.8 seca 360° proximity connection
11.9 seca 360° wireless connection
Fault
Cause
Remedy
Weight or height values do
not appear in the display
No
seca 360° proximity
connection set
up
Administrator:
Setting up a seca 360° proximity
Network connection interrupted
• LAN: Ensure that the network cable is cor
-
rectly plugged in and is not damaged
• WiFi: Reduce distance from router
seca scale/measuring rod incorrectly
configured
Administrator: Configure seca scale/
measuring rod as follows:
• Scan user ID: Required
• Scan patient ID: Required
• Confirmation of measurement on seca
measuring device: Required
• Port used: Port configured for communi
-
cation with the
seca connect 103
software
(default: 22020)
tion to the seca analytics 115 PC software
• Follow
seca 103/452
system instructions
for use
No measurement has yet been
performed using the seca scale/
measuring rod
Perform measurement as described in the
instructions for use for the seca scale/seca
measuring rod
seca scale/measuring rod has not
submitted a value
Submit value as described in the
instructions for use for the seca scale/seca
measuring rod
An error message appears
in the Weight or Height
field
An error occurred on the seca scale/
measuring rod
• Eliminate error as described in the instruc
-
tions for use for the seca scale/seca
measuring rod.
• Follow
seca 103/452
system instructions
for use
• If you are unable to eliminate the error,
contact seca Service.
Fault
Cause
Remedy
Weight or height values do
not appear in the display
seca 360° wireless
wireless module of
the connected scale/measuring rod not
activated
Administrator:
Setting up a seca 360° wireless
No
seca 360° wireless
wireless
connection set up
Scale/measuring rod not wireless-
capable (do not contain a
seca 360° wireless
wireless module)
Enter measured values manually:
