SEBSON SET_6_UNDER, Manual

Page: 5 / 14

5

In order that the warranty claim does not expire please use only the supplied items. Repairs may only be
done by an expert and only by using original spare parts!

In commercial institutions, the accident prevention regulations of the professional trade association for
electrical equipment and facilities must be adhered to.
Notes on commissioning:
Caution:
Do not put the product into operation until all cables are connected together! Make sure that the mains
voltage of your house line corresponds to the specifications in the "Technical Data"!

This product is only suited for indoor-use and not for outdoor-use!

For mounting the lamp, choose a stable mounting surface that can support the weight of the lamp. The
manufacturer is not liable for damage caused by the use of an unsuitable mounting surface!

Install the lamp on a dry and non-conductive surface!

This product is suitable for mounting on normally flammable surfaces!

Plan a minimum distance of 50cm between the illuminated area and the lamp.

To prevent damage to the cables, they must not be strongly bent, pulled or twisted during commissioning!
Technical Data:
Operating voltage: 12V DC
Nominal wattage: 6 x 2W
Nominal luminous flux: 6 x 125lm
Rated color temperature: 3.000K
Beam angle: 90°
Electrical protection: IP20
Protection class: II
Nominal- / rated lamp life time: >25.000h
Switching cycles: >15.000
Disposal note:
This product may not be disposed of with household waste. At the end of its useful life, the product must be
returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local
municipality for the point of acceptance! As the devices contain valuable recyclable materials, they should be sent
for recycling, in order not to harm the environment or human health from uncontrolled waste disposal.
Cleaning:
Danger :
Before cleaning, disconnect the product from the power supply by pulling the power plug out of the socket!
Use a slightly moistened cloth for cleaning. In order not to damage the product, it is essential to avoid water
penetrating into the housing! Never clean the device under running water! Do not use solvent-containing cleaner for
cleaning. Do not use solvent-containing cleaner for cleaning!
CE Declaration of Conformity:
This product has been prepared according to the listed below guidelines:

LVD 2014/35/EU

EMC 2014/30/EU

RoHS 2011/65/EU