SEBSON SC KIT A, Manual

Page: 8 / 27

8
Inserting or changing the batteries (Fig.2):

Note:
Please observe the general instructions for using batteries!

Insert 3 LR03 AAA/1.5V batteries into the battery compartment.
Note:
Make sure that the polarity is correct
when inserting the batteries!

Close the battery compartment again after inserting the battery. Please make sure that the battery
compartment is always closed! Do not use the device if the cover of the battery compartment is damaged or
missing!

Replace the batteries as soon as the symbol "Lo" appears in the display or the device cannot be switched
on at all!
General instructions for using batteries:
Danger:
Never expose batteries to extreme conditions, such as heat or strong sunlight! There is an acute risk of
explosion and leakage!
Danger:
Make sure that batteries can not be swallowed by children, animals and adults! In particular, keep children
and animals away from this product! If one or more batteries are swallowed, seek medical attention immediately!
Here is an acute danger to life. The substances contained in the battery can cause severe poisoning!
Caution:
Remove leaking batteries from the device immediately! The battery acid contained in the battery can
damage the unit! Avoid direct skin contact with leaking batteries! Wash your hands immediately after contact and
take care that the battery acid does not get into your skin, eyes or mucous membranes! Dispose of leaking and old
batteries according to the regulations.

Replace old batteries with batteries of the same type!

Do not use rechargeable batteries. They have a too low voltage!

Remove the batteries from the battery compartment when you are not using the remote control for more than
a month. Make sure that the battery compartment is always closed when the battery is inserted!

Only operate the device when the battery compartment is closed!

Non-rechargeable batteries are not to be re-charged!

New batteries should not be used together with used batteries!

Always use batteries with the same type!

Never short the terminals of the batteries!
Function of the operating keys (Fig.3):
1: Switch on/ Activating or deactivating the weighing-in function (TARE mode)
2: Change the weight unit/ Change in the characteristics of the weighed product (liquid, solid or milk)
Display indication (Fig.4):
1. Weighing function activated (TARE mode)
2. Weighing goods (2.1: liquid/ 2.2: milk/ 2.3: solid)
3. Units for weight
Note: To change the weight unit from ml/g to lb:oz/fl`oz or vice versa, press the
“UNIT”-button.