5
Scope of delivery:
▪
1 Mirror light
▪
4 Screws and 2 Dowels (Ø 6mm) for fixing
General safety information:
Danger:
The installation of this product may be done only by a qualified person according the valid regulations for
electrical installation!
Danger:
In case of damages or contact with water turn off this product immediately without tension and make sure
that a restart is no longer possible!
Danger of suffocation:
Keep this product away from children and animals! The packaging contains small parts
that can be swallowed!
Caution:
Please set up the light beam of the light never directly at people or animals to prevent fire damage or
eyes damage and avoid looking directly into the light source!
▪
An exchange of the built-in luminous in the light is not possible!
▪
The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer
be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
▪
Do not connect a dimmer as this may cause a damage to the lamp.
▪
Do not cover the light with heat insulating materials! As a result of a strong heat development the LED can
be damaged!
▪
The manufacture does not accept any responsibility for injuries or damage resulting from improper use of
this product!
▪
Any other use than the description may result in damage to the product. So the dangers are such as
electric shock, short circuit, fire etc.
▪
We reserve the right to make changes to the product, the packaging or the operating instructions as well as
printing errors.
▪
Protect the product from external damage, heavy dirt, moisture and excessive heat!
▪
In order that the warranty claim does not expire please use only the supplied items. Repairs may only be
done by an expert and only by using original spare parts!
▪
In commercial institutions, the accident prevention regulations of the professional trade association for
electrical equipment and facilities must be adhered to.
Instruction for installation (Fig 1):
Danger:
Before installing make sure that the circuit is interrupted! For installation, the work on the mains voltage is
required. Remove the associated mains fuse or deactivate the switch fuse! Check by using a voltage tester if the
line is de-energized. Make sure that the current circuit will not closed during the installation! There is danger to life
here!
Danger:
The installation of this product may be done only by a qualified person according the valid regulations for
electrical installation!
Attention:
Before drilling the mounting holes, make sure that there are no gas, electricity or water pipes at the
drilling location that could be damaged by this!
▪
This product is only suited for indoor-use and not for outdoor-use!
▪
Plan a minimum distance of 50cm between the illuminated area and the lamp.
▪
Observe the safety instructions and technical data before installing this product!