background image

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE

3

1. Do not leave vacuum while plugged in. Unplug from

outlet when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not use near small children or pets. Do not allow to be

used as a toy. Use of this product by children should

always be supervised by an adult.

4. Use only as described in this manual. Use only

manufacturer-recommended attachments.

5. Do not use with a damaged cord or plug. If vacuum is not

working as it should, has been dropped, damaged, left

outdoors, or dropped into water, take it to a SEBO service

center.

6. Do not pull or carry by cord, use cord as a handle, close a

door on cord, or pull cord around sharp edges or corners.

Do not run vacuum over cord. Keep cord away from heated

surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp the

plug – not the cord.

8. Do not plug in if power switch is in the “ON” position.

9. Do not use outlets above counters to plug in vacuum –

damage to items in the surrounding area could occur.

10. Always carry the vacuum over steps and sills.

11. Do not handle plug or vacuum handle with wet hands.

12. Do not put any object into vacuum openings. Do not use

machine with any openings blocked. Keep openings free

of lint, hair, and anything that may reduce air flow.

13. Do not re-use filter bags or wash the filters.

14. Do not remove any screws from vacuum.

15. Do not vacuum up anything that is burning or smoking,

such as cigarettes, matches, or hot ashes.

16. Do not use vacuum without filter bag and/or filters in place.

17. Turn off all machine controls before unplugging.

18. Use extra care when cleaning on stairs.

19. Do not use machine to vacuum up flammable or

combustible liquids such as gasoline or use in areas

where they may be present.

20. Machines can cause a fire when operated near flammable

vapors or materials. Do not operate this vacuum near

flammable fluids, dust or vapors.

21. Maintenance and repairs must be done by qualified personnel.

22. Use only original SEBO replacement parts.

23. Do not use vacuum as a step.

24. Do not use the handle assembly (5), which inserts into the

top of the filter bag housing, to carry the machine. The

carrying handle is located on the side of the machine.

25. If vacuum is used on plush carpet or carpet with thick

padding, do not leave machine standing in one place with

machine turned on.

26. While the vacuum is in use, the power cord should be

unwound from the cable reel at least two thirds of its length.

27. Keep hair, loose clothing, fingers, and all parts of body away

from vacuum openings and moving parts. Do not place

fingers or other body parts under vacuum unless it is

unplugged. Do not touch the brush roller while the machine

is plugged in.

28. Do not place the power head over rug or carpet edges.

29. The vacuum has a manual reset thermal protector. The

protector is reset by switching off the vacuum. The thermal

protector needs some time to cool down after switching off!

Turn off the machine and unplug it before trouble shooting.

Check the vacuum for air blockages or mechanical failures

before switching on.

30. Store the vacuum in a dry place at room temperature. When

the vacuum is not in use, you should rewind the cord onto

the cord reel

31. Any other servicing should be performed by an authorized

service representative.

32. The hose contains electrical wires. Do not use if damaged,

cut, or punctured. Avoid picking up sharp objects.

33. Always unplug vacuum before connecting or disconnecting

either hose or power head.

34. Use a SEBO power head only in combination with a SEBO

vacuum cleaner.

35. Do not connect power head to a malfunctioning or damaged

vacuum.

When using an electrical appliance, basic precautions must always be followed.

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than

the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any

way. Connect only to the outlet type specified on the serial number plate underneath the machine.

SAVE THESE INSTRUCTIONS.

WARNING:

To reduce the risk of fire, electric shock, or injury:

!

Summary of Contents for Felix Premium























Reviews: