Sebo 300 EVOLUTION Owner'S Manual Download Page 3

1. Do not leave vacuum while plugged in. Unplug from

outlet when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not use near small children or pets. Do not allow

to be used as a toy. Use of this product by children
should always be supervised by an adult.

4. Use only as described in this manual. Use only

manufacturer-recommended attachments.

5. Do not use with a damaged cord or plug. If vacuum is

not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, contact a SEBO
service center.

6. Do not pull or carry by cord, use cord as a handle,

close a door on cord, or pull cord around sharp
edges or corners. Do not run vacuum over cord.
Keep cord away from heated surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp

the plug – not the cord.

8. Do not plug in if switch is in the ON position.

9. Do not use outlets above counters to plug in vacuum –

damage to items in the surrounding area could
occur.

10. Always carry the vacuum over steps and sills.

11. Do not handle plug or vacuum handle with wet hands.

12. Do not put any object into vacuum openings. Do not use

machine with any openings blocked. Keep openings
free of lint, hair, and anything that may reduce air flow.

13. Do not re-use filter bags or wash the filters.

14. Do not remove any screws from vacuum.

15. Do not vacuum up anything that is burning or

smoking, such as cigarettes, matches, or hot ashes.

16. Do not use vacuum without filter bag and/or filters in

place.

17. Turn off all machine controls before unplugging.

18. Use extra care when cleaning on stairs.

19. Do not use machine to vacuum up flammable or

combustible liquids such as gasoline or use in areas
where they may be present.

20. Machines can cause a fire when operated near

flammable vapors or materials. Do not operate this
vacuum near flammable fluids, dust or vapors.

21. Maintenance and repairs must be done by authorized

personnel.

22. Use only original SEBO replacement parts.

23. Do not use vacuum as a step.

24. If vacuum is used on plush carpet or carpet with thick

padding, do not leave machine standing in one place
with machine turned on.

25. Do not use the operator’s handle, which inserts into the

top of the filter bag housing, to carry the machine. Use
the carrying handle located on the backside of the
machine’s bag housing or the front cover.

26. Keep hair, loose clothing, fingers, and all parts of body

away from vacuum openings and moving parts. Do not
place fingers or other body parts under vacuum unless
it is unplugged.

27. Do not place the power head over rug or carpet edges.

28. The vacuum motor has a manual reset thermal protec-

tor. The protector is reset by switching off the vacuum.
The thermal protector needs some time to cool down
after switching off! Check the vacuum for air blockages
or mechanical failures before switching on.

29. The brush motor has a manual reset electronic protec-

tor. If the brush roller is jammed, the machine will shut
down automatically. Turn the machine off and unplug it
before removing the obstruction. Once the obstruction
is removed you may plug it in and turn on the vacuum.

30. Store the vacuum in a dry place at room temperature.

When the vacuum is not in use, you should wrap the
cord on the cable hooks.

31. Avoid picking up sharp objects.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE

3

When using an electrical appliance, basic precautions must always be followed.

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than

the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any
way. Connect only to the outlet type specified on the serial number plate underneath the machine.

SAVE THESE INSTRUCTIONS.

WARNING:

To reduce the risk of fire, electric shock, or injury:

!

Summary of Contents for 300 EVOLUTION

















Reviews: