Required radio, motor and battery
Radio equipment:
• Minimum 4-channel radio system
• 4 digital micro servo 17g.
• 2 servo extensions 400mm, for elevator and rudder servos
Recommended electric motor for best performance:
• Hacker A30-10XL + Jeti Master Basic 70A SBec + APC 14 x 10E
• Battery pack Top Fuel 2500-3S or 3300-3S
Additional required item , tools and adhesives
Tools:
• Drill
• Drill bits: 1,5mm; 2mm; 2,5mm; 3mm
• Phillips screwdriver
• Hobby knife
• Masking tape
• Paper towels
• Rubbing alcohol
• Sand paper
• Soldering iron
• synthetic oil
Adhesives:
• 5-minute epoxy
• thin CA
• medium CA
Warning
This RC aircraft is not a toy!
If misused, it can cause serious bodily harm and damage to property.
Fly only in open areas, preferably in official flying sites, following all instructions included with
your radio and motor.
This plane is a compromise between Aerobatics and 3D flying, and not a pylon racer.
It is built with a very light structure and for this reason we hardly recommend:
→ Do
NOT
fly
your
airplane
at
h
i gh
speed
s , because this may cause structural
failures or flutter due to the extremely large control surfaces.
