CLOCK SETTING/DISPLAY
1. To display the current time, press the
display will return to normal status after f ive seconds.
2. To adjust the time,
.
CLK button once. The
press the CLK button to display the
current time. Press and hold the button again while using the
up or down buttons to adjust the minute and hour.
POWER ON/OFF
Press the power button to
turn the unit on. Press it
again to turn it off.
BASS
1. Press SEL button once,
to display BASS.
2. To adjust BASS level,
turn knob left or right.
TREBLE
1. Press SEL button twice,
to display TRE
2.To adjust TRE level, turn
knob left or right.
BALANCE
1. Press select button three
times, to display BAL
2. To adjust BAL level, turn
knob left or right.
FADER
1. Press select button four
times, to display FAD
2. To adjust FAD level, turn
knob left or right.
MUTE
Press the MUTE button to keep the unit in silent mode. Press
MUTE again. To resume normal listening.
VOLUME
To adjust volume level,
turn knob left or right.
DSP
Press this function button to choose between CLASSIC, ROCK or POP.
7
1. Press the OPEN button,
the front panel will slide down.
1. When the panel bracket is in slide down
position, insert the front panel into the
panel bracket, then push the front panel
from the middle to slide it up.
2. When the panel bracket is in slide up
position, insert one side of the front panel
to its proper position and push the other
side into the panel bracket. A 'click'
sound should be heard.
2. When the front panel slides down, press
the bottom button of the front panel
upward and pull out from the panel
bracket.
3. Note that if the front panel fails to lock
in position properly, the control button
may not function and LCD display may
be missing some segments.
To eliminate this problem press the
open button and then re-install the
front panel again.
3. For safekeeping, store the front panel in
the supplied protective case immediately
after being remoed.
To Detach the Front Panel:
To Reinstall the Front Panel:
4
Open
Bottom
button
Bottom
button
Front panel
Protective Case
Front panel
PWR
PUSH/SEL
PUSH/SEL
CLK
MONO
5
6
3 RPT
4 RDM
MODE
1 PAU
2 INT
DSP
BND/LD
AS/PS
SCAN
CLK
MONO
5
6
3 RPT
4 RDM
MODE
1 PAU
2 INT
DSP
MUT
BASIC OPERATION
USING THE DETACHABLE FRONT PANEL
