Seatronx MP-3700, User Manual

Page: 119 / 134

MPC-3700
Series l User’s Manual
■
Graphic Configuration
119
Chapter 4: BIOS Setup
Item Options Description
Primary Display Auto[Default] ,
PEG + IGFX
Select which of IGFX/PEG Graphics device
should be Primary Display.
PEG+IGFX(Multiple-Displays):
IGFX will be primary and only display under
BIOS and DOS mode.
Internal Graphics Auto[Default] ,
Disabled,
Enabled
Keep IGFX enabled based on the setup options.
GTT Size 2MB,
4MB,
8MB[Default]
Select the GTT Size .
Aperture Size 128MB,
256MB[Default] ,
512MB,
1024MB,
2048MB
Select the Aperture Size.
Note : Above 4GB MMIO BIOS assignment is
automatically enabled when selecting 2048MB
aperture. To use this feature, please disable
CSM Support.
PSMI SUPPORT Disabled [Default] ,
Enabled
PSMI Enable/Disable.
DVMT Pre-Allocated 32M [Default] ,
64M,4M,8M,
12M,16M, 20M,
24M, 28M,32M/F7,
36M, 40M,44M,
48M,52M,56M,60M
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics
Memory size used by the Internal Graphics
Device.
DVMT Total Gfx Mem 128M,
256M[Default] ,
MAX
Select DVMT5.0 Total Graphic Memory size
used by the Internal Graphics Device.
Primary IGFX Boot
Display
VBIOS Default[Default] ,
DP1,
CRT,
DVI,
DP2
Select the Video Device which will be activated
during POST. This has no effect if external
graphics present. Secondary boot display
selection will appear based on your
selection.VGA modes will be supported only on
primary display