Seatool SVH-HERO3-300, User Manual, Page: 6 / 10

4. Slowly and carefully install camera and internal battery power supply making sure camera
does not come in contact with housing's internal controls and the USB cable is neatly
placed in the space provided. If the camera, internal battery power supply and USB cable
are not inserted correctly buttons may not work properly.
5. After performing O-ring Maintenance, carefully close back cover making sure nothing is
caught between the Secure-Latch and housing. Push Secure-Latch into the locked
position making sure the Lock Lever is in the locked position. Double check to make sure
the Secure-Latch is securely locked into place.
REOVING CAMERA
CAUTION! After use in water, water will remain in gaps between housing, back cover and
Secure-Latch. Wipe any water off housing with a soft dry towel to prevent water from falling
on camera or internal battery power supply when back cover is opened.
1. Press Lock Lever while pulling Secure-Latch away from housing main body . Open back
cover.
2. Carefully remove camera remove camera and internal battery power supply from
housing.
HANDLING PRECAUTIONS
※
The front Lens / LCD Status Screen / Status - Wi-Fi Indicator Window and rear LCD
Window are manufactured using hard coat acrylic. When cleaning use a clean soft cloth
taking care not to scratch them.
※
CAUTION! When the internal battery power supply (iBUFFALO BSMPA04 or other) is
connected to the camera and turned ON it is in a constant state of charging which may
generate heat both from the camera and battery. It is most important to keep housing with
camera and battery installed out of direct sunlight and in a cool place when not
submerged.
EXTERNAL LIGHTING
※
The optional Accessory Shoe can be used for installation of a target light. Please be
mindful of the weight of the light(s) you intend to use. For heavy lights please use
Seatool/Recsea genuine tray and grip assemblies.
※
Two (2) screw holes are provided at the bottom of the housing for use in attaching
Seatool/Recsea genuine tray and grip assemblies.
CAUTION! Seatool or Recsea genuine options STRONGLY recommended. Leakage or
damages due to the use of non-genuine options are NOT covered under warranty.
※
Please refrain from using lights attached to the Accessory Shoe as a carrying handle.
CAUTION! Damage is irreparable.
MAINTENANCE
CAUTION! Allowing saltwater and contaminants to dry on housing can damage functions and
O-rings possibly causing water leakage. Clean with fresh water only, using a soft, dry cloth to
wipe away water.
※
We recommend a complete housing overhaul once every year.
1. After use in salt water, wash off salt and other contaminants by soaking empty housing
thoroughly in a bucket of fresh water (lukewarm) for 10 to 20 minutes.
4.