Seat TOUCH/COLOUR, Owner'S Manual

Page: 25 / 44

Audio mode
● ALTERNATIVELY: Press the button marked
SETUP
on infotainment.
● Press the function button
Remove the USB device safely
›››
page 21 .
Illegible data medium
If the data on a connected support device
cannot be read, the warning
No playable files
is displayed.
Note
Read and bear in mind the manufacturer's in-
struction manual for the external data medi-
um.
Connection and use
Fig. 21 Standard representation: menu ME-
DIA.
Before connecting or playing an external data
medium, turn down the volume on the info-
tainment system
›››
page 6 .
Connecting and disconnecting an external
data medium
● Connect a 3.5 mm Jack cable to the AUX-IN
interface (the cable is not supplied).
● If necessary, switch on the external data
medium or select the appropriate data mode.
Regardless of any indications to the contrary
that there may be on the matter, the external
data medium can be disconnected from the
USB/AUX-IN multimedia interface at any time
without losing the data.
Operating the infotainment system
An external data medium that is correctly
connected to the USB/AUX-IN multimedia in-
terface can be operated using the infotain-
ment system.
● In the MEDIA menu press the function but-
ton, MEDIA
›››
Fig. 21 .
● In the pop-up window, press the function
buttons
USB
or
AUX
.
Other operations with the external data medi-
um (changing tracks, selecting tracks and ac-
tivating playback modes) are carried out as
described in the corresponding chapters
›››
page 19 .
Possible error messages after connecting an
external data medium
Error mes-
sage Cause Procedure
Device not
supported The external
data medium
cannot be
played – Consult the list of
supported devices
on the web.
– When possible,
update the software
of the external data
medium.
Unit not op-
erational Communication
interrupted. Check the connec-
tion and make sure
the external data
medium is working
correctly.
Due to the large number of different data media availa-
ble, it is not possible to guarantee fault-free operation of
all functions described here.
Note
If a connected device is not recognised, un-
plug all connected devices and reconnect the
device.
23