Seat Toledo 2019, Owner'S Manual, Page: 92 / 300

Emergencies
Changing the fog light bulbs
Front fog light bulb
Fig. 96 Fog light: remove the grille
Fig. 97
Fog light: detach the bulb holder
–
Remove the bolt
›››
Fig. 96
1
from the fog
light grille with a screwdriver.
–
Subsequently, remove the clips located on
the edge of the grill with gentle leverage.
–
Remove the 3 bolts
2
.
–
Remove the metal clip situated on the up-
per part of the fog light by pulling away
from the vehicle
3
and extract the fog
light.
–
Remove connector
›››
Fig. 97
1
from the
bulb.
–
Turn the bulb holder
›››
Fig. 97
2
to the left
and pull.
–
Remove the bulb by pressing on the bulb
holder and turning it counter-clockwise at
the same time.
–
Installation involves all of the above steps in
reverse sequence.
–
Check that the bulb works properly.
Changing the rear lights (on
the side panel)
Removing the rear light 1)
Fig. 98
Remove the rear light unit from side
panel.
1) In the case of LED rear lights of the side panel
only the turn signal lamp can be changed. The il-
lustrations in the manual correspond to the bulb
version and do not correspond exactly to the LED
version.
90