Seat Toledo 2019, Owner'S Manual, Page: 91 / 300

Fuses and bulbs
–
Turn the wheel for access to the wheel
housing cover and remove the cover
›››
Fig. 92 .
–
Remove the protective cover from the
headlight
›››
Fig. 93 .
–
Remove connector
›››
Fig. 93
1
by pulling
outward.
–
Unclip the retainer spring
›››
Fig. 93
2
pressing clockwise and inwards.
–
Extract the bulb and fit the replacement so
that the lug on the base fits into the recess
on the reflector.
–
Fit the connector.
–
Fit the protective cover. Make sure that the
cover fits correctly on the housing during
operation.
–
Replace the wheel housing cover.
–
Check whether the new bulb is working.
Changing turn signal bulbs
Fig. 94
Changing turn signal bulbs.
–
Raise the bonnet.
–
Turn the bulb holder
›››
Fig. 94
1
anti-
clockwise and remove it.
–
Remove the bulb by pressing on the bulb
holder and turning it anti-clockwise at the
same time.
–
Fit the replacement bulb in the bulb holder
and turn clockwise as far as it will go.
–
Check whether the new bulb is working.
Changing daytime driving light
bulbs
Fig. 95
Changing daytime driving light bulbs.
–
Raise the bonnet.
–
Turn the bulb holder
›››
Fig. 95
1
anti-
clockwise and remove it.
–
Remove the bulb by pressing on the bulb
holder and turning it anti-clockwise at the
same time.
–
Fit the replacement bulb in the bulb holder
and turn clockwise as far as it will go.
–
Check whether the new bulb is working.
89