Seat Toledo 2019, Owner'S Manual, Page: 23 / 300

The essentials
Turning on/switching off the ignition, glow
plugs reheating
●
Turn on the ignition: turn the key to the
2
position.
● Turn off the ignition: turn the key to the
1
position.
●
Diesel vehicles

: the glow plugs reheat
when the ignition is switched on.
Starting the engine
●
Manual transmission: press the clutch ped-
al all the way down and move the gearbox
lever into neutral.
●
Automatic transmission: press the brake
pedal and move the selector lever to the P
position or into N .
●
Turn the key to the
3
position. The key au-
tomatically returns to the
2
position. Do not
press the accelerator.
Start-Stop system*
When you stop and release the clutch pedal,
the Start-Stop system* turns off the engine.
The ignition remains switched on.

›››
in Introduction on page 196

›››
page 196
Lights and visibility
Light switch
Fig. 30
Instrument console: light panel.
Turn the switch to the required position
›››
Fig. 30 .
Sym-
bol
Ignition
switched off
Ignition is
switched on

Fog lights, dipped
beam and side
lights off.
Light off or daytime
driving light on.

The “Coming
home” and “Leav-
ing home” guide
lights may be
switched on.
Automatic control of
dipped beam and
daytime running
light.

Side light on.

Dipped beam
headlight off
Dipped beam
switched on.

Fog lights: move the switch to the first po-
sition, from positions

,

or

.

Rear fog light: move the switch complete-
ly from positions

,

or

.
Turn on fog lights: push the switch or turn it to
the

position.

›››
in Introduction on page 120

›››
page 120
Turn signal and main beam lever
Fig. 31
Turn signal and main beam lever.
More the lever to the required position:
Right turn light: right-hand parking light
(ignition switched off).
»
1
21