manualshive.com logo in svg

Seat Toledo 2019, Owner'S Manual, Page: 173 / 300

Share
Download
Seat Toledo 2019 Owner'S Manual Download Page 173

Operating modes

Operating modes

Radio

Related video

Fig. 187 

Radio mode

Radio main menu

Fig. 188 

RADIO main menu.

Fig. 189 

Radio mode: station list (FM).

Press the infotainment button 



 to open

the 

Radio

 main menu 

››› 

Fig. 188

.

Radio main menu function buttons

Function button: function

1

To change the group of memory but-
tons slide a finger over the memory
buttons from left to right or vice-versa

BAND

Allows you to select the frequency
band.

STATION
LIST

Opens the list of currently receivable
radio from the active frequency band.

MANUAL

Allows you to select the frequency
manually.

VIEW

Allows you to select the information

shown on the screen. Only available in
DAB mode.

SETTINGS

Opens the setup menu of the active

frequency band (FM, AM or DAB).

Function button: function

 / 

Selects the previous or next stored sta-
tion or of the station list. This setting

can be changed in the Radio settings

menu (FM, AM, DAB).

1

 to 

18

a)

Memory buttons 

››› 

page 172

.

SCAN

Stops the scan function (only visible
when the function is under way). It can
be activated in the settings menu (FM,

AM and DAB).

a)

The Media System / Touch Colour model has 15

memories.

Information and possible icons

Display: Meaning

A

View the frequency or the name of the

station and, where applicable, the radio
text. The name of the radio station and
the radio text will only be displayed if
equipped with RDS and if it is active.

RDS
Off

The RDS radio data service is deactiva-
ted.

TP

Traffic information can be retrieved: se-

lect 

Radio > Settings > Traffic

station

.

No stations with traffic news are availa-

ble.

The radio station is stored on a memory

button.

»

171

Summary of Contents for Toledo 2019













































































































































































































































































































Reviews:

No comments