manualshive.com logo in svg

Seat Toledo 2019, Owner'S Manual, Page: 129 / 300

Share
Download
Seat Toledo 2019 Owner'S Manual Download Page 129

Lights and visibility

Press the button 

››› 

Fig. 136

 to switch the

lighting on or off.

Interior lights / ambient light*

The lighting of the central console area, the
door handles, the storage pockets in the front
doors and the footwell area will switch on
fully when the doors are opened and will de-
crease in intensity while driving with the dip-
ped beam headlights on.

Depending on the version, a logo is back-lit
on the front passenger's side of the dash
panel. This light comes on when the dipped
beam is activated.

The intensity of the ambient light* can be ad-
justed using the menu 

Easy Connect >

Lighting settings > Vehicle interior
lighting

 

››› 

page 24

.

Glove box light

The light will come on automatically when
the glove compartment is opened. The light
will go out when the glove compartment is
closed.

Luggage compartment light

The light switches on automatically when the
boot is open and switches off automatically
10 minutes after the boot lid has been
opened.

Visibility

Heated rear window

Fig. 137 

Heated rear window switch.

–

Switch the heated rear window on or off by
pressing the 

 button 

››› 

Fig. 137

, the warn-

ing lamp in the button will come on or go off
respectively.

The heated rear window only works when the
engine is running.

After approximately 7 minutes, the heating
device of the rear window 

switches off

 auto-

matically.

For the sake of the environment

The heated rear window should be switch-
ed off as soon as the glass is demisted. By
saving electrical power you can also save
fuel 

››› 

page 211

.

Note

In the event of a drop in voltage in the on-
board systems, the heated rear window
switches off automatically to ensure
enough power to control the engine

››› 

page 255, Automatic disconnection of

electrical equipment

.

127

Summary of Contents for Toledo 2019













































































































































































































































































































Reviews:

No comments