Seat Tarraco 2020, Owner'S Manual

Page: 77 / 424

Instruments and warning/control lamps
WARNING
If messages are ignored, the vehicle may
stall in traffic and cause accidents and se-
vere injuries.
●
Never ignore the messages displayed.
●
Stop the vehicle at the next opportunity
and in a safe place.
Note
To avoid affecting the correct operation of
the system, take the following points into
consideration:
●
Regularly clean the area of vision of the
camera and keep it in a clean state, without
snow or ice.
●
Do not cover the field of vision of the
camera.
● Always replace damaged or worn blades
when required to avoid lines on the cam-
era's field of vision.
●
Check that the windscreen is not dam-
aged in the area of the camera's field of vi-
sion.
●
The use of outdated maps on the naviga-
tion system may cause the system to show
traffic signs incorrectly.
● In the waypoints mode of the navigation
system, the traffic sign detection system is
only partly available.
●
Failure to heed the control lamps and
corresponding text messages when they
light up may result in damage to the vehi-
cle.
Time
Setting the time on the infotainment sys-
tem
●
Press the infotainment

button.
●
Press the
SETTINGS > Date and time
function button to adjust the time
›››
page 82 .
Adjusting the time in the SEAT Digital
Cockpit
●
While in the
Driving data
menu, select
the
Range
function (infotainment button
 >
View > Driving data > Range
).
●
Press the button

on the multifunction
steering wheel until the Service menu is dis-
played on the instrument panel display
›››
page 69 .
●
Select the menu
Time
.
●
Adjust the correct time by turning the right
thumbwheel of the multifunction steering
wheel.
Revolution counter
The rev counter indicates the number of en-
gine revolutions per minute.
Together with the gear-change indicator, the
rev counter offers you the possibility of using
the engine of your vehicle at a suitable
speed.
The beginning of the red zone of the rev
counter indicates the maximum speed in any
gear after running-in and with the engine hot.
However, it is advisable to change up a gear
or move the selector lever to
D (or lift your
foot off the accelerator) before the needle
reaches the red zone
›››
.
We recommend that you avoid high revs and
that you follow the recommendations on the
gear-change indicator. Consult the addition-
al information in
›››
page 261, Selecting the
optimal gear .
CAUTION
●
To prevent damage to the engine, the rev
counter needle should only remain in the
red zone for a short period of time.
● When the engine is cold, avoid high revs
and heavy acceleration and do not make
the engine work hard.
For the sake of the environment
Changing up a gear early will help you to
save fuel and minimise emissions and en-
gine noise.
75