manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual, Page: 295 / 424

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 295

Driver assistance systems

WARNING

If the warning lamps and the corresponding
messages are ignored when they light up,
the vehicle may stall in traffic and cause
accidents and severe injuries.

●

Never ignore the warning lamps or mes-

sages.

●

Carry out the necessary operations.

CAUTION

Failure to heed the control lamps and cor-
responding text messages when they light
up may result in damage to the vehicle.

Blind spot detector (BSD)

Fig. 273 

In the exterior mirrors: blind spot de-

tector indication.

Fig. 274 

Rear view of the vehicle: radar sensor

zones.

The blind spot detector uses radar sensors to
monitor the areas behind the vehicle

››› 

Fig. 274

. The system does this by measur-

ing the vehicle's distance from other vehicles
and its speed differential. The blind spot de-
tector will not work at speeds of less than ap-
prox. 15 km/h (9 mph). The system uses opti-
cal signals in the external rear view mirrors to
notify the driver.

Indication on the exterior mirror

The control lamp (expanded view) provides
an indication in the corresponding external
mirror 

››› 

Fig. 273

 regarding the traffic situa-

tion behind the vehicle, if it is deemed to be
critical. The control lamp of the left-hand ex-
ternal mirror indicates the traffic situation to
the left of the vehicle, and the control lamp of
the right-hand external mirror indicates the
traffic situation to the right of the vehicle.

»

293

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments