Seat Tarraco 2020, Owner'S Manual, Page: 275 / 424

Driver assistance systems
Operating the speed limiter with
the third lever
Fig. 255
On the left of the steering column:
buttons to operate the speed limiter.
Connecting
●
Move the lever towards the steering wheel
to position

.
The last programmed speed is stored. It does
not take effect yet.
Activating the speed limiter
●
While driving, press button

›››
Fig. 255
1
.
The current speed is stored as the maximum
speed.
Setting the programmed speed
The programmed speed can be set:
● Move the lever to the pressure point

to increase speed in small increments of 1
km/h (1 mph).
●
Move the lever upwards

to increase in
increments of 10 km/h (5 mph).
●
Press the button

›››
Fig. 255
1
to re-
duce speed in small increments of 1 km/h (1
mph).
●
Move the lever downwards

to reduce
in increments of 10 km/h (5 mph).
To change the programmed speed without
interruption, keep the lever pressed in the di-
rection
 +
or
 -
. The speed is
limited to the set value.
Switching off the speed limiter
●
Move the lever to position

.
The system switches off.
Switching off temporarily
If you want to temporarily deactivate the
speed limiter, e.g. for overtaking, move the
lever to the pressure point

or press but-
ton
›››
Fig. 255
2
.
After overtaking, the speed limiter can be ac-
tivated with the previously programmed
speed by moving the lever to the pressure
point

.
Emergency brake assistance
system (Front Assist)*
Introduction
Fig. 256
Related video
Fig. 257 On the instrument panel display: ad-
vance warning indications.
The objective of the system is to prevent
head-on collisions against objects that may
be in the vehicle’s path or minimise the con-
sequences of such impacts.
Depending on several factors and how criti-
cal the situation is, the system operates in a
staggered manner. First it warns the driver,
»
273