Seat Tarraco 2020 Owner'S Manual Download Page 188 | Manualshive

Page: 188 / 424

background image

Infotainment System

Frequently asked questions about
Full Link

What connection method is used?

USB Cable.

Will the USB cable be supplied with the vehicle?

No. The USB cable supplied with the device should
be used.

Is it possible to navigate?

Navigation is possible in each one of the Full Link
technologies if the technology is available in your

country and if you have the Navigation app.

What is the difference between using the Full Link

system navigator (via a device) instead of anoth-

er navigator?

Advantages: Daily updates.
Issues: data consumption, reception problems.

Can I send voice messages?

With certified applications, you can reply, not send.

What applications will be visible while driving?

Depending on the technology:
– for MirrorLink

®

: Apps certified by SEAT and the

CCC,
– for Android Auto™: Apps selected by Google™,

– for Apple CarPlay™: Apps selected by Apple™.

Where can I find compatible Apps?

Compatible apps are listed at the following links:
www.mirrorlink.com/
www.android.com/auto/
www.apple.com/ios/carplay/

Where can I download the apps?

On Google Play™ for Android Auto™/MirrorLink

®

and

on Apple Store™ for Apple CarPlay™.

If Full Link stops working, where can I go to repair
it?

If the problem is in the car, you should go to the deal-
er. If the problem is in the mobile device, you should

see your mobile telephone vendor.

Will WhatsApp be certified?

The WhatsApp situation depends on the technology.

Is MirrorLink

®

available in my country?

Yes, MirrorLink

®

is available in all countries and re-

gions where SEAT is located.

What are the differences between MirrorLink

®

,

Android Auto™ and Apple CarPlay™?

MirrorLink

®

is not compatible with Android Auto™ and

Apple CarPlay™, as they are different technologies.
They all coexist in Full Link, although Android Auto™ is
designed for mobile devices with the Android™ oper-
ating system, and Apple CarPlay™ for iPhone.

Can MirrorLink

®

be installed in a previous SEAT

model?

No, it is not possible.

Where can I find more information about Full
Link?

If you have any questions, please see our

Innova-

tion/Connectivity

sections on our website:

www.seat.es or www.seat.com or e-mail seat-re-
[email protected]

SEAT Media Control*

Introduction

Fig. 178

Related video

The

SEAT Media Control

app can be used

to remotely operate some partial functions in

Radio

,

Media

and

Navigation

mode. Informa-

tion can be exchanged between a device
and the Infotainment System.

1)

Availability depends on the country.

186

«
...
186
187
188
189
190
...
»

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tarraco 2020

Brand: Jeep Pages: 25

Brand: Jeep Pages: 51

Brand: Farenheit Pages: 8

Brand: RAM Pages: 292

Brand: RAM Pages: 116

Brand: Uebler Pages: 18

Brand: Ford Pages: 12

Brand: Axxess Pages: 8

Brand: Waeco Pages: 172

Brand: VBG Pages: 16

Brand: Gator Pages: 2

Brand: Improved Racing Pages: 17

Magic Watch MWE-850-4DSM

Brand: Waeco Pages: 204

Brand: Saab Pages: 9

Brand: Motoalliance Pages: 4

ChargePoint CT500-DSTAND

Brand: Coulomb Technologies Pages: 26

Brand: Metra Electronics Pages: 17

Brand: Ford Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands