manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 185

Connectivity

Tethering of portable devices that
support MirrorLink

®

, Android Auto™

and/or Apple CarPlay™ technolo-
gies

Fig. 175 

Full Link menu

When you enter Full Link for the first time, the
technologies available for pairing the porta-
ble device are displayed.

Once the device connects via USB, the sys-
tem will offer you the technologies available
for establishing a connection.

In the event of simultaneous connections be-
tween two devices with different operating
systems, a choice will be presented for which
one to make the connection with 

››› 

Fig. 175

.

View of the device list

iPhone™ devices only support Apple Car-
Play™.

There are some Android devices that support
MirrorLink

®

 and Android Auto™.

Bear in mind that once the device is connec-
ted it will not be available as an audio source.

Full Link Settings

Function button: function

Activate data transfer for SEAT apps

: allows the ex-

change of information between the vehicle and ap-
plications authorised by SEAT.

Last Mode

If the telephone connection is terminated on-
ly by unplugging the cable, the next time the
device is connected, the session will start
without the user having to take any action

1)

.

Information

Consult the mobile device manual.

Depends on each technology:

Availability in a country
Third party applications

1.
2.

For further information:

MirrorLink

®

:

www.mirrorlink.com

Apple CarPlay™

:

www.apple.com/ios/carplay

Android Auto™

:

www.android.com/auto

Note

●

In order to use Android Auto™ technology

it is necessary to download the Android
Auto™ application, located on Google
Play™.

●

Only compatible applications can be

used, in accordance with the technology
connected.

1)

Unless the device requires the screen to be un-

locked in order to establish the connection.

183

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands