Seat Tarraco 2020 Owner'S Manual Download Page 183

Page: 183 / 424

Connectivity

configured. Select

Settings > Time and

date

●

SEAT apps are designed to communicate

with the vehicle and interact with it through
the Full Link connection.

●

You can find further information on the

technical requirements, compatible devi-
ces, suitable applications and availability
at www.seat.com or at SEAT dealers.

Is Full Link blocked?

Fig. 171

Message on Infotainment system

screen.

If your vehicle does not have Full Link, you
can purchase it as an accessory at your
SEAT dealer

›››

Fig. 171

Requirements for Full Link

Fig. 172

Full Link Requirements

Full Link Activated

: If you do not have

Full Link in your vehicle you can acquire it
as an accessory at your Authorised Serv-
ice.

Compatible Phones

. Go to the Mirror-

Link

, Android Auto™ or Apple CarPlay™

websites to confirm whether your phone
is compatible with the system.

Mirror Link

–

Check smartphone compatibility:
www.mirrorlink.com/phones

–

MirrorLink

1.1 or higher

–

Some of the Apps certified by SEAT or
the CCC must be installed in the de-
vice.

Android Auto

–

Check smartphone compatibility. An-
droid Auto™: www.android.com/auto/

–

Android 5.0 (Lollipop) or higher

–

Install Android Auto™ app

Apple CarPlay

–

Check smartphone compatibility. Apple
CarPlay™:www.apple.com/ios/carplay

–

iPhone 5 or higher and iOS 7.1 or higher

–

Turn on the SIRI personal assistant (see
phone settings)

USB cable connecting car to phone

Use the approved USB cable supplied
with the phone.

181

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Search results

Summary of Contents for Tarraco 2020

Reviews:

Related manuals for Tarraco 2020

Brands by name

Popular brands

Seat Tarraco 2020, Owner'S Manual

Search results

Summary of Contents for Tarraco 2020

Reviews:

Related manuals for Tarraco 2020

Brands by name

Popular brands