Seat Tarraco 2020, Owner'S Manual

Page: 179 / 424

Introduction
Voice control
How it works
Fig. 169
Voice control: main screen
Many of the radio, media, telephone and nav-
igation functions can be changed by voice
commands.
The voice control of the infotainment system
will only be available for the language selec-
ted in
System settings
›››
page 174 .
●
Voice control settings
›››
page 179 .
Start and stop voice control
●
To activate voice control, briefly press the
button on the multifunction steering wheel

or the infotainment system.
●
When activating voice control, a dialogue
start tone will sound and the main voice con-
trol screen will be displayed,
›››
Fig. 169 , (the
main screen will appear in the format selec-
ted in Voice control settings
›››
page 179 ).
The spoken indications guide you through the
following “dialogue”.
●
Speak the desired command and follow the
instructions in the “dialogue”. Often a func-
tion can be activated by different spoken
commands. If in doubt, try speaking a com-
mand or say
Help .
●
When an action is taken (e.g., call a con-
tact), the voice control ends automatically
and you must activate it again if you want to
continue with it. There are certain commands
after which the voice control does not end,
and it waits by saying
Next command? .
●
To manually end voice control, press and
hold the button

until the corresponding
confirmation signal sounds, or briefly press
the

button twice, or press the function but-
ton

in the upper right corner of the screen.
●
You can also end the voice control by
speaking the following commands: Stop or
Cancel .
Voice control help
It is recommended to listen to the Help the
first time you use the voice control.
●
Activate voice control

.
● Say the command Help to start it in the lan-
guage indicated
System Settings
, and fol-
low the instructions in the dialogue. The Help
command can also be spoken followed by a
function of the infotainment system, such as
“
Help with navigation ”.
Interacting with the dialogue mode
Icons in upper left corner:
The system waits for a user's command.
The system has recognised a command
and will act shortly.
The system transmits a spoken com-
mand and confirms the command that
has been given.
The system is in paused mode. (max. 3
minutes).
Hide or show the voice control menu
›››
Fig. 169 .
Operation during the dialogue
While the infotainment system transmits a
spoken instruction, the symbol

will be dis-
played on the screen.
●
You can stop the speech by pressing the
upper left icon on the screen or button

and
voice recognition will resume for the user.
IMPORTANT: The system will ONLY recog-
nize a command when the symbol

is
displayed as “ active ” on the panel or on
the touchscreen.
»





/

177