Navigation
The calculation will be performed in accord-
ance with the data selected in the
Route op-
tions
menu
After starting route guidance, three
alterna-
tive routes
will be suggested depending on
the selected setup
. These 3 routes
correspond to the selectable route options
Economical, Short and Fast.
Route criteria: Meaning
Blue route
: Economical route, the route is calculated by
taking into consideration economic factors.
Red route
: Fastest route to the destination, even if it is
necessary to make a deviation.
Orange route
: Shortest route to the destination, even if it
results in longer travelling time. The route may have un-
conventional sections such as secondary roads.
●
Select the desired route by pressing it.
The setting for the route criteria in the
Route
options
menu is changed accordingly.
If no route is selected, then route guidance
starts automatically after about one minute
using the setting selected in the
Route op-
tions
.
Navigation announcements (audible
recommendations for the driver)
Once the route has been calculated, the sys-
tem gives the first navigation announcement.
Up to 3 navigation announcements are given
before a turn, e.g. “Prepare to turn left”,
“Turn left in 300 metres” and “Now turn left”.
●
Press the setup button
4
to listen
to the last audible navigation instruction.
The distances indicated largely depend on
the type of road and the speed at which you
are driving. For instance, navigation an-
nouncements are given much earlier on mo-
torways than on urban roads.
Appropriate navigation announcements are
also given on multi-lane roads, branching
roads and at roundabouts, for example: “At
the roundabout, take the second exit.”
A navigation announcement informs you
when you have reached your “destination”.
A navigation announcement informing you
that you have reached the “destination area”
is given if the exact destination cannot be
reached because it is located in a non-digi-
tised area. It also indicates the cardinal point
and the distance to the previously defined
destination. Navigation resumes “offroad”.
During
dynamic route guidance
, you receive
information about reported traffic congestion
on the route. An additional navigation an-
nouncement is given if the route is recalcula-
ted due to traffic congestion.
During a navigation announcement, you can
change its volume using the volume control
up to a defined minimum or maximum vol-
ume. The following navigation recommenda-
tions will then be made at the adjusted vol-
ume.
For other adjustments to the navigation rec-
ommendations, see
Navigation announce-
ments setup.
Note
If you miss a turning during route guidance
and are currently unable to turn back, keep
on driving until the navigation system offers
a new route.
Note
The quality of the navigation recommenda-
tions given by the Infotainment system de-
pends on the navigation data available and
any reported traffic problems.
Route
In the Navigation main menu, press the
Route
function
button.
The
Route
function button is only displayed with route
guidance activated.
Function button: effect
Stop guidance
: Aborts current route guidance.
New stopover destination
: To enter a new destination or a
new stopover
»
43
