Telephone management (PHONE)
●
Briefly press the
button on the multi-
function steering wheel to interrupt the spo-
ken indication of the infotainment system
and give the next command.
IMPORTANT: The system will ONLY recognise
a command when the
“
active
”
symbol is
displayed on the panel or the touch screen.
If you make a mistake when giving a com-
mand or give an incomplete command, and it
has no effect, you can repeat the command.
The symbol
remains active.
●
Briefly press the button
of the multi-
function steering wheel to repeat the com-
mand.
Instructions for voice control
For optimum functioning of the voice control,
follow these instructions:
●
Speak slowly and clearly, as far as possi-
ble. The system will not recognise mispro-
nounced words, or words and figures in
which syllables are omitted.
●
Telephone numbers must be indicated fig-
ure by figure or in blocks of numbers in units,
tens or hundreds.
●
Speak at a normal volume, without exag-
gerated intonation or long pauses.
●
Avoid noise from the exterior and nearby
(for example, conversations inside the vehi-
cle). Close all doors, windows and the sliding
roof.
●
Do not aim the air from the diffusers at the
roof of the passenger compartment.
●
If you are driving very fast, speak a little
louder.
You can access the instructions by saying:
“
Instructions, tutorial, introduction
”. You can
also listen to the instructions in parts. These
are divided into 7 blocks. To access them,
give any of the previous commands followed
by “
part + <number>
”. For example “
Tutorial
part 1
”.
Voice control (RADIO) – Red
Button
Main radio commands (FM)
Next station
Previous station
Station <name>
Scan mode
AM mode:
DAB band
Voice control (MEDIA) – Red
Button
Main media commands
Next source
Previous source
Next track
Previous track
Mix Mode
Repeat track mode
Repeat all mode
Scan mode
»
45