Navigation (NAV)*
128
Map position
– Press the
Map
control button in the navigation menu.
– Press the control knob to switch to the map side menu.
– Rotate the control knob to the third menu item
– Press the control knob.
– Select
Detail info
,
Set as destination
,
Set as stopover
or
Store in
directory
as desired.
You can set the point on the map currently marked with the cursor as a desti-
nation or stopover, or store it to the directory. If additional information is
available for the selected point on the map, you can display it by selecting the
Detail info
function.
You can also select a new point on the map by moving the cursor
page 129. You can then choose between the options
Set as destination
,
Set as stopover
or
Store in directory
for the new point as desired.
You can use the option
Set as stopover
if you have selected the “route with
Fig. 153 Navigation
system: Map position
Fig. 154 Navigation
system: Map position
media_systemE_EN.book Seite 128 Montag, 21. September 2009 1:48 13
