Handling: General information
10
Mute
Switching on the mute function
– Briefly press the ON/OFF knob. The volume for the enabled audio
source will then be switched off.
Switching off the mute function
– Briefly press the MMI knob or:
– Turn the ON/OFF knob.
By briefly pressing the MMI knob, the sound of the currently enabled audio
source will be muted. When the mute function is enabled, the symbol
will appear in the bottom of the display. The sound is switched back
on when the MMI knob is pressed briefly or turned.
When the navigation system is switched on, the volume is automatically set
to the factory default.
Note
If you enable the mute function during a traffic announcement or a navigation
cue, the current announcement will be cancelled. If you enable the mute func-
tion once again, the audio source will be muted.
Home function
Press the corresponding function button within a main function, the system
will automatically jump to the main menu of that main function.
In navigation*, “Home function” depends on the route guidance selected: if
you have activated route guidance with stopovers, you go to the menu for
route planning by pressing the function button again
If you have activated route guidance without stopovers
page 120, you go
to the main navigation menu* (single destination mode) by pressing the
function button again.
Fig. 8 Navigation system:
Mute
Fig. 9 Navigation system:
Mute function symbol
A
1
media_systemE_EN.book Seite 10 Montag, 21. September 2009 1:48 13
