If and when
229
Safety First
Operating Instructions
Practical Tips
Technical Specifications
– Remove the lid with a flat screwdriver, placing it in notch
⇒
page 228, fig. 156
.
Changing bulbs
– Remove the bulb holder by pressing the fastening clips
⇒
fig. 157
and pulling outwards.
– Replace the faulty bulb, rotating it to the left and outwards.
– To refit follow the steps in reverse order, taking special care when
fitting the bulb holder.
Side turn signals
– Press the turn signal to the left or to the right to remove the bulb.
– Remove the bulb holder from the turn signal.
– Remove the failed bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First fit the turn signal in the opening in the chassis, fastening the
tabs
⇒
fig. 158
, and then fit in the bulb as shown by the
arrow
⇒
fig. 158
.
A
A
Fig. 157 Removing the
bulb holder
A
B
Fig. 158 Side turn
signals
A
1
A
2
IbizaST_EN.book Seite 229 Dienstag, 14. September 2010 1:31 13