Seat Exeo 2012, Owner'S Manual, Page: 69 / 313

67 Cockpit
The yellow warning

lamp remains on if the system is faulty or if
the pressure is too low in at least one tyre. In the event of a system
fault, the letters TPMS are displayed in the centre of the instrument
panel
⇒
fig. 45 . If the tyre pressure drops rapidly, message
A
⇒
fig. 46 will be shown on the central display of the instrument
panel. If the pressure loss is more gradual, message
B
⇒
fig. 46
will be shown on the central display of the instrument panel. This
message does not show the tyre affected. Should any of these
warnings be displayed:
– Stop the vehicle.
– Check the tyres. Although the warning corresponds to just one
tyre, you should also check the others.
– Correct the tyre pressure
⇒
page 236.
For more detailed information on the tyre pressure monitoring system,
please refer to
⇒
page 235.

Cruise speed (Cruise control)*

The indicator lamp

on the instrument panel lights up when the cruise
control system is operating.

Trailer turn signals*

This turn signal lamp flashes when the turn signals are op-
erating while towing a caravan or trailer.
The turn signal lamp

flashes when the turn signals are operated if a trail-
er is correctly coupled to the vehicle.
Where a turn signal bulb does not work, either on the trailer or on the tow-
ing vehicle, the turn signal bulb will not flash.

Anti-lock brake system (ABS)

The warning lamp monitors the ABS and the integrated elec-
tronic differential lock (EDL).
The warning lamp

lights up for a few seconds when the ignition is switch-
ed on and while the engine is being started. The lamp goes out again after
the system has run through an automatic test sequence.
There is a fault in the ABS if:
●
The warning lamp does not light up when the ignition is switched on
● The warning lamp does not go out again after a few seconds
● The warning lamp lights up when the vehicle is moving
The vehicle can still brake in the normal way (except that the ABS control
function is out of action). Please take the vehicle to a qualified workshop as
soon as possible. For further information on the ABS, see
⇒
page 185.
If a malfunction should occur in the ABS, the ESP warning lamp will also
light up.
Entire brake system fault
If the ABS warning lamp

lights up together with the brake warning lamp

⇒
page 70 (with the handbrake released), this indicates not only a
fault in the ABS function, but probably also a malfunction in the main brake
system
⇒
.
The symbol

will light up on the instrument panel if there if a fault in the
brake system . Please refer to
⇒
page 77.

Safety First Operating Instructions Practical Tips Technical Specifications