Driving
●
Briefly press area
to increase speed in
small increments of 1 km/h (1 mph).
●
Press and hold the area
to continu-
ously increase speed in increments of 10
km/h (5 mph).
●
Briefly press area
to decrease speed
in small increments of 1 km/h (1 mph).
●
Press and hold area
to continuously
decrease speed in increments of 10 km/h (5
mph).
The speed is limited to the set value.
Switching off the speed limiter
●
Move control
1
to position
.
The system switches off.
Switching off temporarily
If you want to temporarily deactivate the
speed limiter, e.g. for overtaking, move the
control
1
to position
or
press button
2
.
After overtaking, the speed limiter can be ac-
tivated with the previously programmed
speed by pressing button
3
in the
area
.
Emergency brake assistance
system (Front Assist)*
Introduction
Fig. 177
On the instrument panel display: ad-
vance warning indications.
The objective of the system is to prevent
head-on collisions against objects that may
be in the vehicle’s path or minimise the con-
sequences of such impacts.
Depending on several factors and how criti-
cal the situation is, the system operates in a
staggered manner. First it warns the driver,
and if the driver’s reaction does not occur or
is insufficient, it activates independent emer-
gency braking.
The function is intended to prevent collisions
with parked vehicles or vehicles in the same
lane travelling in the same direction, or with
pedestrians crossing the vehicle’s path.
It
may fail to activate in other hazard situa-
tions
Front Assist is enabled between 4 km/h (2.5
mph) and 250 km/h (156 mph). Depending
on a range of conditions, some of the func-
tions described below are omitted to optimize
the behaviour of the system.
Front Assist is a driving assistance function
that can never replace the driver’s atten-
tion.
Safety distance warning
If the system detects that you are driving too
close to the vehicle in front, it will warn the
driver with this indication on the instrument
panel display
.
The timing of the warning varies according to
other factors: driver behaviour and speed.
Advance warning
If the system detects a possible collision with
the vehicle in front, it alerts the driver by
means of an audible warning and an indica-
tion on the instrument panel display
›››
The warning moment varies depending on
the traffic situation and driver behaviour. At
the same time, the vehicle will prepare for a
possible emergency braking
›››
.
244
Summary of Contents for Ateca 2020
